- Compatible With】AC Compressor Clutch Kit fits for Subaru Forester 2008-2010 H4 2.5L, Forester 2011-2013 H4 2.5L(Turbocharged only), Forester 2014, Impreza 2008-2014 H4 2.5L, WRX/WRX STI 2015
- [Package Content]: 1x Pulley (With Pressed-in Bearing), 1x Front Plate, 1x Electromagnetic Coil, 1 Pack of Accessories (2x Retaining Clips, 4x Shims, 1x Center Bolt)
- Reference Number】Ac Compressor Clutch Kits fits for OE 73111-SA010, 73111-FG001, 73111-FG002, 73111-FG000, 73111SA010, 73111FG001, 73111FG002, 73111FG000, 506021-7562, 5060217572, Z0007584A, 9910107107, Z0011100A
- High-Quality Materials Improve Reliability and Safety】:The design of the Clutch allows the compressor to remain inactive during non-working conditions, reducing mechanical wear and heat accumulation. he air conditioning compressor clutch can protect the compressor and air conditioning system.This helps extend the life of the compressor and reduces repair and replacement costs.
- 【Easy to Install】: The Air Conditioning Compressor Clutch is installed using bolts or fixed clamps, and the installation process is relatively simple. They are often tightly integrated with the compressor and can be easily installed onto existing compressors.If you are not familiar with installation methods, professional installation is recommended.
AC Compressor Clutch Compatible with OEM numbers:
107278,73111-SA010 73111-FG001 73111-FG002 73111-FG000 A/C Clutch
Fitment:
2008 2009 2010 SUBARU FORESTER 2.5L
2011 2012 2013 SUBARU FORESTER WITH TURBO ENGINE
2014 SUBARU FORESTER 2.0L & 2.5L
2008 SUBARU IMPREZA 2.0L & 2.5L
2009 SUBARU IMPREZA 2.5L
2010 SUBARU IMPREZA 2.0L & 2.5L
2011 SUBARU IMPREZA 2.0L & 2.5L
2012 SUBARU IMPREZA 2.0L (PLEASE CONTACT US)
2012 SUBARU IMPREZA 2.5L
2013 SUBARU IMPREZA 2.0L (PLEASE CONTACT US)
2013 SUBARU IMPREZA 2.5L
2014 SUBARU IMPREZA 2.5L
2015 SUBARU WRX
2015 SUBARU WRX STI
How to install?
1. Always wear eye protection.
2. Remove the failed compressor. Transfer any switches, sensors, brackets, or manifolds from the original compressor to the replacement unit.
3. Thoroughly flush each component not being replaced with an approved AC flush solvent.
4. Replace the accumulator or dryer and all expansion devices. including the orifice tube and screen.
5. After installing the replacement compressor on the vehicle ensure proper mounting and belt alignment.
6. It is recommended to install an in-line filter in the suction line near the compressor inlet.
7. Add the proper type and amount of ac oil as per manufacturers procedures.
8. Apply a vacuum to the car ac system. A minimum of 29 inches of mercury for one hour to insure moisture and residual flushing solids or boiled from the system.
9. Recharge your air conditioning system using the recommended Freon.
10.After you finish your repairs, conduct a complete system performance test.
